Processes

Chemical Cleaning

Chemical Cleaning

For almost two decades Altair Technologies’ in-house cleaning process has included a heated strong alkaline detergent followed by a cascading DI water rinse.  The DI Rinse is calibrated and monitored for conductivity/resistivity and all water used in our in-house cleaning is filtered and polished.  This process is environmentally friendly and is more than adequate for roughly 98% of the work we do.  This process is particularly effective when the proper machining lubricants and coolants are used (ask Altair Sales about our approved lubricants and coolants). 



Once cleaned, trace amounts of hydrocarbons are volatilized during the furnace run where any oxidation is also reduced.  Although relatively simple and environmentally friendly, this process produces exceptional yields and has been tested and verified many times over through metallurgical cross sectional analyses. In addition to our in-house process, we also employ ultrasonic cleaning.

When a stronger chemical cleaning or chemical etching and/or plating is required, we subcontract this work out to one of the close-by and approved Plating/Cleaning Shops.

TESTIMONIALS

"We recently installed the High Energy Gun received from Altair Technologies. We had an extremely demanding customer and could not afford a delay. The Altair gun was a direct replacement that activated quickly and was soon running like a champ. Thank you, Altair."

-Ron Drake
Senior Vice President
Oncology Services International

Read more ...